Three stage battery charging mode, compatible with Gel, AGM, Flooded, Lithium batteries
Efficient up 3~5% than traditional power frequency inverter
DIP Switches: Low Battery, AC Input Range, Power Saver, Solar/Utility AC Priority
Pure sine wave output, input & output fully isolation
PTM-12 remote controller allows for operation from a distance
Power Saving Mode helps preserve battery capacity over long period of no operation
Electronic protection against Over/under voltage, overload, over-current, overheating, short circuit
This kind of smart inverter charger comes with 2 years warranty
| Models | CPS10K |
| Rated Power(-10-50℃) | 10000W |
| DC Input | |
| Rated Voltage | 48VDC (40.0-64.0VDC) |
| Max. Charge Current | 70A house battery |
| Battery Type | AGM/Gel/Flooded/Lithium |
| AC Input | |
| Output Voltage | 90-140A/170-275VAC |
| Input Frequency | 45~65Hz |
| AC Output | |
| Output Voltage | 120/240VAC±5% |
| Oput Frequency | 50/60Hz±0.3 |
| Wave Form | Pure Sine Wave |
| Transfer Time | ≤8ms |
| Efficiency | >88% |
| Overload | 105-120% 10s/ >120% 3s/ >150% 1s |
| Max. Bypass | 12000W |
| Protection | DC over/low volt, AC input low/low volt, AC short circuit, over temp, overload |
| Self-consumption | 60W |
| Idle-consumption | 23.5W |
| Protection | |
| Dc Low-volt Alarm/Shutdown | 42.0 (Customizable at Engineering mode); x2 for 24V, x4 for 48V |
| AC Low-Volt Switch To DC | 187.0V (Customizable at Engineering mode) |
| Bypass To Invertering | 198.0V (Customizable at Engineering mode) |
| Battery Over-charge Shutdown | 62.8V |
| General | |
| Working Temperature | -10~45℃ |
| Storage Temperature | -20~55℃ |
| Work/ Storage Humidity | 0-90% No condensation |
| Dimension (W*D*H) | 650*505*210mm |