Supports three-stage battery charging mode, compatible with Gel, AGM, Flooded, and lithium batteries
Suitable for DIP switch: low battery power, AC input range, power saving, solar/Utility AC priority
Built-in DC power supply and AC source automatic transfer switch
The power saving mode of this smart inverter charger helps maintain battery capacity when not in operation for a long time
2 years warranty
| Models | CPS8K |
| Rated Power(-10-50℃) | 8000W |
| DC Input | |
| Rated Voltage | 48VDC (40.0-64.0VDC) |
| Max. Charge Current | 55A house battery |
| Battery Type | AGM/Gel/Flooded/Lithium |
| AC Input | |
| Output Voltage | 90-140A/170-275VAC |
| Input Frequency | 45~65Hz |
| AC Output | |
| Output Voltage | 120/240VAC±5% |
| Oput Frequency | 50/60Hz±0.3 |
| Wave Form | Pure Sine Wave |
| Transfer Time | ≤8ms |
| Efficiency | >88% |
| Overload | 105-120% 10s/ >120% 3s/ >150% 1s |
| Max. Bypass | 10000W |
| Protection | DC over/low volt, AC input low/low volt, AC short circuit, over temp, overload |
| Self-consumption | 55W |
| Idle-consumption | 23.5W |
| Protection | |
| DC Low-volt Alarm/Shutdown | 42.0 (Customizable at Engineering mode); x2 for 24V, x4 for 48V |
| AC Low-volt Switch To DC | 187.0V (Customizable at Engineering mode) |
| Bypass To Invertering | 198.0V (Customizable at Engineering mode) |
| Battery Over-charge Shutdown | 62.8V |
| General | |
| Working Temperature | -10~45℃ |
| Storage Temperature | -20~55℃ |
| Work/ Storage Humidity | 0-90% No condensation |
| Dimension (W*D*H) | 650*505*210mm |